Tag: China

Mould Industry Development Trend In The Future

blogger /

Modern mold industry has good prospects for development. Modern mold industry is an integral part of the high-tech industry, has a very important role for the promotion of the manufacturing modernization. As the basis for the manufacturing sector, the modern mold industry is constantly absorbing scientific and technological achievements, high-tech, the application of information technology, new materials and new technology, the transformation and enhance the level of the mold manufacturing technology industry, promote manufacturing modernization. International Mould & Metal & Plastic Industry Suppliers Association official said that the mold industry has gone through the hands of the workshop manufacturing and industrial production stage, today has entered the third stage of modern production. The modern production stage is characterized by the use of high-tech and standardization. CNC machining equipment, based on highly standardized, achieve mold CAD / CAE / CAM production, up to micron level accuracy of its type of processing, according to the mold size and complexity, the production cycle is only 90 to 20 days or less. Standardized mold only conduct single-piece production molds, with special technical and economic significance. Mold standardization include: mold design parameters of standardization, the standardization of common parts and components, parameters, the serialized production mold prototype system architecture design and its parameters, which is a prerequisite to achieve mold CAD / CAE / CAM.
Mold industry has a wide range of market demand. The mold is a key process equipment for industrial production. In electronics, building materials, automobiles, motor, electrical, instrumentation, home appliances and communication equipment and other products, from 60% to 90% of the parts have to rely on the molding. The pillar industry of the national economy can not do without the use of molds to manufacture a wide variety of parts which requires the mold industrial development with suitable. In many the project of merchants introduction, the establishment of the project often depends on the size, capacity and level of the area of mold production. Modern mold industry is not only a large number of domestic demand, but there is a large international market. In recent years, the total annual sales of global mold has been for more than 650 billion U.S. dollars, including the United States, Japan, France, Switzerland and other countries export about 1/3 of the total output. About $ 20 billion in Asia, including China in recent 15 billion U.S. dollars, accounting for 1/4 share of global mold. In mold product structure, China’s middle and low mold relative surplus, low cost-effectiveness, but the lack of the ability of high-grade mold. Each year need to import large quantities of large, sophisticated, complex, long-life mold.
World economic integration give China’s mold industry challenges and opportunities for development. Accelerate the realization of the modernization of the mold industry is an important guarantee to upgrade the manufacturing level and improve the manufacturing modernization, which in line with the country’s current industrial policy direction. Mold occupy an important position in the national economy, is a technology, capital, labor intensive industries. The developed countries have has been transferred the mold manufacturing to China. The influx of a large number of overseas mold enterprises brings advanced technology and modern management to promote technological advances of the traditional mold companies in China, but it also brings challenges. Although the level of mold design and manufacture behind the developed countries in general, gradually shrinking trend of the development of the industrial countries mold brought us unprecedented opportunities for development.
Zhongshan Changming Electronics Co.,LTD is specialized in producing all kinds of remete control ,household life silicone products , antiflaming glue, seal ring and a variety of conductive silicone buttons business. The company was established in 2006, the plant covers an area of 10,000 square meters, has more than 200 employees and advanced production equipment, strong technical force. We hope you can join us and established long-term relations of cooperation with us.
Product:

How Chinese Textile Industry Survived The Financial Crisis

blogger /

The impacts of the financial crisis had deprived Chinese textile industry of a large amount of profits. A large number of employees were laid off and the gloomy market demand had indeed made the bad situation even worse.

The decreased sales results had caught the attention of the government. From the second half of 2008, government had increased four times in total the export tax rebate rate, from 11 percent to 16 percent. This conduct of government had enabled the textile industry to regain its competitiveness in the market. Gradually, the textile industry started to get itself back on the right track.

Government played a vital role in dragging the textile industry out of the financial crisis. In 2009, the textile industry went through a series of structure adjustment and scope expansion under the support of the government. Government reinforced its investment in the textile industry to ensure its smooth recovery. The government also established a special fund which was designed to introduce advanced techniques to the further development of textile industry.

Moreover, the relevant textile companies conducted a series of reflections and questioned themselves: what made them so fragile under the attack of financial crisis. It was during this period of time that the textile underwent reorganization and re-construction. It began to dedicate to polishing their brands, developing new brands of excellent quality and affordable price. For instance, the MH Industry Co., Ltd shifts its focus to providing the customers with access to products of high quality and reasonable price.

Besides, it dawned on the textile industry that the cheap labor cost in China was not the permanent advantage for them to compete in the international market. Consequently, the textile industry spent a considerate amount of capital importing technical equipment from foreign countries. In 2009, the sales figure and growth rate of textile industry improved significantly.

The Chinese textile industry has grasped the opportunity for development in the new century. It has fully taken advantage of the optimized industry system and adopted various advanced technologies and management experience. In the same time, it encourages innovation and creativity. In addition, it pays equal attention to explore both domestic and international market. However, there are still problems waiting to be solved. For example, the technical investment is too insufficient to meet the demands of the consumers. The textile industry lacks professional talents and expertise. Unlike other textile industry in western countries, Chinese textile industry appears dull by comparison in term of integrating itself to fashion industry.

Nevertheless, the future lying ahead is nothing but bright and promising. You can refer to the mh-chine.com and find more relevant information.

Macro Yuzuo industry boss ASUS push Giant Lion Plan – Asus, Acer – Communications Industry

blogger /

HC communication network : Every Chinese New Year, PC industry, someone shouted chant, strong business reputation for the coming year.

Usual this year, is the voice of Taiwan’s largest PC Hutch macro?, ASUS. Last night, they are almost the same time year-end banquet was held, and the site announced a new strategy for the future, a more than a high tone.

Global notebook industry in the first six of the Asus, rush like a lion. Johnny Shih, chairman, said in 2009, Asustek in the supply chain management, significant progress, the company decided to start and is confident about the second generation of “giant lion program.”

The core of this plan consists of two parts. The first notebook in the field of “three-three plan”; second board in the field of “55 plan.” “Three-three plan” means is that next year 2011, ASUS should cut the world’s top three notebook business account; the “55 Plan” is, 5 years, ie 2012 (starting from 2007) ASUS motherboard brand business worldwide market share will reach 50%.

“Is not only a giant lion, but to be LIONKING (Lion King).” Johnny Shih said.

Than last year, Dell became the world’s second-largest notebook business macro?, It is complacency. The company chairman JT Wang said at the annual meeting: “Needless to say, this year’s goal is to achieve NB (notebook) on the right the first shipment.”

JT Wang said that in 2009 the world a “gloomy”, the main competitor decline by 15% to 20%, while the macro? Produce a revenue growth of transcripts, while reducing costs, profits grow slightly. In a “second” after doing the “Boss” has no choice. Macro? CEO Lanci said the spot, this year, internal notebook shipment goal from the original growth of 3 percent to 35% ~ 40%.

Taiwan Hutch goal clearly different. Macro? Finger at HP. ASUS did not mention the name, but under the current rankings, it must go beyond the Toshiba, Lenovo, to achieve the objective. As of last year, Asustek ranked No. 6, Top 5 were HP, Acer?, Dell, Lenovo and Toshiba.

Macro? Notebook shipped 33 million units last year, this year’s goal is to more than 45 million units, directly beyond the Hewlett-Packard. This is not easy. Although the HP series of product quality complaints and litigation experience, but also do not see the weak trend, recently, it has announced this year’s strategy, the channel will further sink, much to suppress the momentum of Lenovo.

JT Wang said, can be expected, the match this year or will “do anything to” anti-system. But now the company in better shape. Ship or whether the first quarter were very strong for new orders, and supply chain partners are committed to fully assist macro? Board the world’s throne. He said that in the first quarter results certainly “momentum rainbow.”

But the revenue base camp is in the credit crisis in Europe. JT Wang said that in Europe a “problem” countries account for the macro market? Revenue share is not high, there will be no material impact.

Comparison, Asus seems more difficult. It might be able to go beyond Toshiba, Lenovo, but beyond some difficulties. ASUS notebook shipments last year, about 12.2 million units, slightly behind Lenovo, to grow 30% this year to reach 16 million units scale.

But Lenovo has been completed over the past year to adjust organization and products began to show a counter-trend, over the past two consecutive profitable quarter, plus cash on hand, there are more than 20 billion dollars. Lenovo recently launched a mobile Internet strategy, will strengthen this year, consumer products Marketing Not willing to be overtake.

However, it is undeniable that the Chinese market, Lenovo’s headquarters are encountering increasing pressure. “First Financial Daily” in Shanghai’s Xujiahui shopping recent series bainaohui, Pacific Computer, Dinghao and Computer City Furong River Tianshan road, almost every prominent Sell Location, have the macro?, ASUS, Dell’s figure, which has entered the fight was close.

The e-commerce company in China offers quality products such as China big button universal remote control , China touch screen universal remotes, and more. For more , please visit wireless multimedia remote today! y!

Indian Cement Industry Set To Grow

blogger /

The one Indian industry which is set for growth over the coming years is the Cement Industry. The worlds second largest cement producer (after China) reached its total installed capacity to 231 million tones after adding 11 million tones of capacity during the first half of 2009.

The main characteristics of this industry is that it is highly fragmented, cyclical and highly capital intensive. There are around 125 large and 300 small cement plants. Some of the leading cement manufacturers are UltraTech/Grasim combine, Dalmia Cements, India Cements and Holcim. Returns depend on the vibrancy of the economy as a whole as it directly affects the sales realization and capacity utilization.

The industry is heavily dependent on 3 sectors; coal, power and transport. Energy and freight are the two major cost components. Over the last few years, while the proportion of energy cost has increased marginally, freight costs have declined.

Increasing government expenditure on infrastructure sector and rising demand for commercial and residential real estate development has resulted in higher demand for cement in the country. According to a report by the ICRA Industry Monitor, the installed cement capacity is expected to increase to 241 million tones per annum by the end of 2010. It also expects that driven by higher domestic demand and increasing utilization, India’s cement industry may record an annual growth of 10% over the coming years.

Taking cue of the global economic slowdown which was affecting cement companies in India last year, Governments initiative to re-impose counter-veiling duty and special counter-veiling duty this year will help provide a level playing field for domestic players. Moreover, it also appointed a coal regulator to facilitate timely and proper allocation of coal blocks to the important sectors like cement. As coal is one of the prime raw material used in cement production, this seems to be a positive move.

Growth potential of cement industry can be judged by the fact that the per capita cement consumption (156 kg) in India is still well below the global average consumption (396 kg). This gap can be expected to be covered in the coming years. Besides, housing sector accounts for almost 50% of the total cement consumption in the country and the large young population will ensure that the demand for infrastructure stays put.

The rising cost of energy, transportation raw material continues to pressure the industry as a whole. To sustain profitability, companies will have to explore alternate source of energy while at the same time enhance their operational efficiency.

Industry experts opine that the cement industries should now increase their focus on investing adequately in developing human resources that will be capable enough to address the professional needs of construction industry including advanced technologies and construction practices, project management construction and litigation.

Read To know more on the concerns facing the cement industry

Chinese Hardware Industry Highlights The International Competitive Edge – China Sodium

blogger /

Hardware industry is a traditional and new and modern industries. Hardware products widely used in the past, people call it hardware, such as nails, scissors, wrench, tool what is, and we need time to shop can be bought several smoothly, no one how much these things as objects. But Do not look at these small metal products, and now has developed into a world influence of the largest industry.
1, hardware development in various categories
With the development of the times, hardware toward personal wealth is that people can feel. Only a small lock, for example, before the family is just general household locks locks, bicycle locks, but with the motorcycle, automobile industry, high-end residential development, a number of companies to develop modern means of transport suitable for all kinds of motor lock, car lock, anti-theft security lock. Not only lock varieties has increased, and the integration of traditional products showed the trend of high-tech, electronic locks, fingerprint lock, and so one after another; traditional tools hardware, but also changed: garden tool to in-depth extension of a simple pruning twig of the scissors, step by step for the new development of family-and community-building manual, power tools, weeding machine, etc. replaced.
According to statistics, China’s hardware products from the early 80s of last century, 40 kinds of products, less than 500 varieties, surge to the present more than 10,000 varieties, an increase of 20 times; product categories have also been the traditional daily-use hardware from the past, Architectural Hardware, tools, door hardware three categories increased, including shower rooms, gas appliances, range hood, kitchen equipment, cooking utensils and other 10 products.
2, hardware, enterprise economies of scale
The number of enterprises in China hardware from the early 80’s to 50000 more than 2,000. Ultra-billion-scale enterprises from the ring in 1988 when the statistics, Zhang Koizumi, solid edge, the Great Wall Seiko, Wen Deng Wei Li, 14 enterprises, the rapid rise to the present more than 100. Today, the hardware scale enterprises are mostly owned by a modern factory. For example, 10000 and the company’s production workshop, the tall plant to natural light, modern style, both conducive to the production, but also environmentally friendly and completely get rid of the hardware business in the past in people’s minds, “small, poor, chaotic,” the backward image.
In the coastal areas of Zhejiang, Guangdong, Jiangsu, Shanghai, Shandong and other places, has formed a number of characteristics of the economic industrial base, metal industry has become the backbone of local industry or focus on the development industry and hardware industry in the country have played an important role, such as Guangdong Xiaolan Town, Yuhuan County, Zhejiang Province has become China’s leading hardware production and export base; Yangjiang, Guangdong has become China’s largest production base of knives, scissors; Wenzhou, Zhejiang, was awarded the “Chinese locks are” title; Hebei Anping wire mesh industry base built , Asia 80% of the mesh from Anping.
China’s hardware industry to an annual growth rate of 20% of steady development, the annual output value of 4,000 billion yuan, higher than the household appliances industry. Data show that exports of metal products in 2005 amounted to 30.512 billion U.S. dollars, year on year increase of 26.44%. China’s exports of light industry as a whole accounts for about 25% of the country’s total exports, hardware industry, light industry exports ranked the top three.
Three, metal industry, highlights the international competitive edge
In recent years, China’s hardware industry’s international competitiveness has been increasing. Our hardware products, trade specialization index (TSC Index) remained at between 0.78-0.85, and increased year by year, which shows that our hardware products, import and export trade status has been greatly improved, and the whole still in a relatively advantageous position . On the other hand, China’s comparative advantage index of metal manufactures (RCA index) is basically maintained at 0.8 to about 0.9, indicating that China’s hardware products with a moderate international competitiveness. But it should be noted that in recent years, China’s hardware products, RCA index showing a declining trend, mainly because of China’s hardware products are labor-intensive products, due to capital, technology and content is not high, in the international market more susceptible to the developed countries barriers to trade restrictions. Die 100-hui Luo, CEO pointed out that the view from the products and the enterprises themselves, and many hardware companies approach is a form of processing trade, technological innovation capability is not strong, which makes China’s hardware industry has insufficient capacity for competition in the international market gradually lost their advantage , in the future course of development, for the major comparative advantage of labor costs on hardware industry, at the same time weakening the comparative advantage will increasingly need to rely on and enhance their competitive edge to maintain and enhance the international competitiveness of the industry. According to Die 100-hui Luo, CEO survey said that at present China has formed the Pearl River Delta, Yangtze Delta and the Shandong Peninsula three hardware industry zone, Yongkang, Zhejiang appeared, Zhongshan Xiaolan, and Jiangsu Qidong other metal industry cluster.
The development of China’s hardware industry cluster reveals eight major advantages:
One is beneficial to the depth of the division of labor between enterprises and technological innovation. Every enterprise will be fully funding, focus on the most advantageous to do their part, that the enterprise’s core competencies, other related outsourcing to professional company to complete, each product is a summary of a number of core competence.
Second, it helps to save transaction costs. Enterprises are faced with the nearest, a large number of raw materials suppliers and equipment suppliers can lower costs, higher demands, faster speed to purchase a variety of inputs, including raw materials, spare parts, machinery and equipment, the kinds of services and human resources.
Thirdly, it is beneficial to industry and the professional market, pushing each other forward. Industrial cluster is conducive to the formation of the professional market, but also has a greater impact at home and abroad the professional market, both pro-business product sales, but also conducive to the information, and timely adjustment of product structure.
Fourth, it helps to stimulate the sense of competition. The same kinds of products from a large number of production among enterprises will naturally compete, so as to continuously improve product quality and grade.
5 is conducive to Investment. Supporting industries within the industrial cluster system and perfect service system, starting a business with low entry costs and exit costs, not only conducive to attracting foreign direct investment, but also conducive to the cluster of enterprises within the domestic and international capital markets.
6 is conducive to governance “credit deficit disorder.” As the regional industry concentration, among many enterprises to know the root Zhidi, once late payments, forgery, and avoiding the debt and other dishonest acts, it will immediately at the local spread, promises difficult for enterprises to locally based, so the phenomenon of corporate dishonesty between low probability.
7, it helps to promote business innovation. A variety of the latest market, product and technical information gathered, coupled with frequent exchanges between a variety of information within the cluster to promote a greater chance of collision of innovative ideas. LAW 100-hui said the competition within the cluster, as well as personnel exchanges also makes businesses more intense desire to learn, easy to drive innovation in the whole industry.
8 is conducive to the creation of regional brands. Regional industrial advantages and product features are conducive to the formation of regional brand, brand high-impact areas to attract more outlets, suppliers, investors, and various talents. Thus further contributing to the prosperity of the upstream and downstream industries, the development of regional economy as a whole are very favorable.